You've traced a pine-branch design for this year's holiday cards onto a 4 x 6 inch block, picked up the cutter, and stopped: which blade goes first? A V-shaped cutter draws lines, a U-shaped gouge clears space, and many prints use both. Cut the outlines and fine details with a V, then use a small U to work around them and a larger U to clear the open background, keeping the cut shallow and the blade moving away from your hands.
What the V Leaves Behind
A V cutter makes a narrow channel with a sharp bottom. In the print, that channel stays white while the surrounding surface prints, so a V is the tool for outlines, hair, wood grain, lettering edges, and hatching.
Line width depends on depth. Because the cut is V-shaped, pushing deeper makes the line wider at the surface, so practice holding a steady angle on scrap before cutting the final block. A small V gives the finest control; a larger V makes bolder lines in one pass.
What the U Is For
A U gouge cuts a rounded channel that removes more material per pass. A small U tidies edges around a V outline and carves medium-width marks, while a large U clears broad background areas faster.
The ridges a U leaves in a cleared area can pick up ink from the brayer and print as texture. If you want a clean background, clear it a little deeper and check it with a test print; if you like the marks, leave them as part of the design.
Reading the Blade Set You Buy
Sets describe their blades in different ways. The UCEC Linocut Carving Tools Linoleum Cutter Assortment listing names its six blades by shape: small, medium, and large V-cutters, a U-gouge, and flat and round tips, on one purple handle, and states it is designed for rubber, soft linoleum, and vinyl.
The Speedball 4131 Linoleum Cutter listing names its cutters by number instead, #1, #2, #3, #5, and #6, with a red handle and a hand-adjustable metal chuck. Match each number to the maker's own profile chart before you start so you know which blades are V and which are U.
Carving Order and Safe Hand Position
Work from detail to background. Cut the V outlines first, then use the small U along the inside of those lines, and finish by clearing large areas with the biggest U. That order helps keep a slip in the background from running into finished detail.
Whatever the blade, push it away from your body and keep your other hand behind the cutting edge, never in front of it. A bench hook holds the block against its lip so your free hand doesn't have to; turn the block, not your wrist, to follow a curve. Keep cuts shallow, because a blade forced too deep is harder to control and can slip.
A Few Things People Ask
Q: Can I cut a whole print with just a V cutter?
You can for a line-only design, but clearing a background with a V is slow. A U removes broad areas in fewer passes.
Q: Why are there ridges in my cleared background?
U gouges leave rounded channels, and shallow ridges can pick up ink. Clear a little deeper, or keep the marks as texture.
Q: How do I know which numbered blade is which?
Numbered sets don't always state the shape in the listing. Check the maker's profile chart before carving.
Carving the Lines Before the Background
Browse Printmaking with your design in hand and check how each set describes its blades before ordering.
- Mark which parts of the design are lines (V) and which are cleared areas (U)
- Practice V cuts on scrap to see how depth changes line width
- Cut V outlines first, then small U, then large U for the background
- Confirm blade shapes from the listing, such as UCEC's three V-cutters and one U-gouge, or the maker's chart for a numbered set like Speedball's
- Push the blade away from your body, keep your free hand behind the cutting edge, never in front of it, and keep cuts shallow so the blade can't slip, with the block against a bench hook, and turn the block, not your wrist, to follow a curve
- Take a test print to check whether ridges in cleared areas pick up ink
V and U blades do different jobs: one leaves lines, the other removes space. Plan which areas belong to each, carve from detail outward, and keep both hands behind the blade so the block moves instead of your fingers.