Matching a Carving Block's Size and Thickness to the Print You Have in Mind

Adult carving a thick pink rubber block in a bench hook beside a larger thin gray carving sheet

Two 4 x 6 inch carving blocks in this collection can differ in thickness by more than double. One listing states 0.12 inch, about 3 mm, while another states 8 mm. Size and thickness are separate decisions: size comes from the finished image and the paper it will print on, and thickness comes from how deep you plan to cut and how you'll hold the block.

Start From the Finished Print

Decide what the print is for, then work backward. A greeting card, a bookmark, or a repeat stamp for gift wrap needs a small block. A framed print for a hallway or a poster for a garage sale needs a large one.

Then check the paper. A 9 x 12 inch block won't fit on standard 8.5 x 11 inch letter paper, and an 8 x 10 inch block leaves only about a quarter inch on the sides. If you print on letter paper, a 4 x 6 or 6 x 8 inch block leaves a comfortable border. Blocks here are listed in sizes from 2 x 2 inches up to 12 x 18 inches, so the range covers both ends.

Larger blocks also mean more carving time, more ink to roll out evenly, and more area to press by hand. For a first large piece, a 6 x 8 or 8 x 10 inch block is a step up without jumping straight to a 12 x 18 inch sheet.

How Thickness Changes the Carving

Thicker blocks give you more depth to clear backgrounds with a wide U gouge before you reach the bottom. The SGHUO 12pcs 4"x6" Pink Rubber Linoleum Blocks listing states an 8 mm thickness and claims it helps keep fine details intact without accidental piercing. That is the maker's description, but the reasoning holds: more depth leaves more margin for a cut that runs deep.

Thin sheets work differently. The Yeaqee 8 Pcs 9 x 12 Inch Linoleum Blocks listing states a 1/8 inch thickness, and another large sheet here is listed at 3 mm. These are easier to trim into custom shapes, but they leave less room for deep clearing, so take shallow passes and check the back as you go.

Holding the Block While You Carve

Bench hooks in this collection are listed at about 9 x 7 inches. That holds a 4 x 6 or 6 x 8 inch block comfortably, but a 9 x 12 or 12 x 18 inch sheet hangs past the edges. For larger blocks, set them on a non-slip mat against a fixed stop so the block can't slide toward you.

Whatever the size, push the cutter away from your body, keep your holding hand behind the blade, and turn the block rather than your wrist on curves. If you trim a thin sheet to size, use a craft knife on a cutting mat with a metal ruler, and keep your fingers on the side of the ruler away from the blade.

FAQ

Q: Is a thicker carving block always better?

Not always. Thicker blocks give more room for deep clearing cuts, while thin sheets are easier to trim into shapes; pick by how deep you'll carve.

Q: What block size fits on letter paper?

A 4 x 6 or 6 x 8 inch block prints with a border on 8.5 x 11 inch paper. A 9 x 12 inch block is larger than the sheet.

Q: Can I use a bench hook with a 12 x 18 inch sheet?

A 9 x 7 inch bench hook is smaller than that sheet, so use a non-slip mat and a fixed stop instead.

Sizing the Block Before the First Cut

Choose the block size from the finished print and its paper, then choose thickness from the depth you plan to carve. Make sure your bench hook or mat can hold the block still, and carve away from your body every time. Browse Printmaking and compare each listing's stated dimensions and thickness before you sketch.

  • Decide the print's purpose and paper size first
  • Leave a border: a 4 x 6 or 6 x 8 inch block suits letter paper
  • Choose a thicker block for deep background clearing
  • Take shallow passes on thin 1/8 inch or 3 mm sheets
  • Use a bench hook for small blocks and a non-slip mat with a stop for large ones
  • Carve away from your body with your holding hand behind the blade
  • Trim sheets with a craft knife on a cutting mat against a metal ruler, fingers on the side of the ruler away from the blade
  • Compare a specific block's stated thickness, such as SGHUO's 8 mm, with your plan, not just the collection's general sizing